
Filtrasi terpercaya dimulai dengan spesifikasi yang diverifikasi.
Air Oil Separator 1092081300
Elemen penggantian Elemen Kompresor Udara
Elemen Filter Kompresor Udara
1092081300 (also written as 1092-0813-00) is a high-efficiency oil-gas separator filter element specially designed for oil-injected screw air compressors. It is used to thoroughly separate lubricating
Perintah dikonfirmasi oleh tim kami untuk harga, kompatibilitas dan pengiriman.
Spesifikasi terverifikasi untuk seleksi percaya diri.
Konfirmasikan persyaratan instalasi terhadap peralatan manual atau dokumentasi asli.
| Tinggi | 620 mm |
|---|---|
| Diameter luar | 467 mm |
| Diameter Luar Flang | 600 mm |
| Peringkat filtrasi | 0.01ñm |
| Berat | 8 kg |
1092081300 (also written as 1092-0813-00) is a high-efficiency oil-gas separator filter element specially designed for oil-injected screw air compressors. It is used to thoroughly separate lubricating oil mist from clean gas in compressed air, ensuring air quality and the economic efficiency of lubricating oil circulation.
Perbaikan Inti Kemajuan
• High-precision oil-gas separation.
Adopts imported multi-layer composite superfine glassfiber filter media with a filtration accuracy of 0.01 – 1 μm and a separation efficiency as high as 99.9% – 99.99%.
• Extremely low oil content in exhaust gas.
The residual oil content of exhaust gas is strictly controlled at ≤ 3 ppm, which effectively reduces lubricating oil loss and prevents oil contamination of downstream pneumatic equipment and precision gas-consuming terminals.
• Low pressure drop and energy-saving design.
The optimized folded and wound structure provides sufficient dust holding capacity and flow area, with an initial pressure difference ≤ 0.02 MPa, greatly cutting down the energy consumption of the air compressor.
• High temperature, high pressure and corrosion resistance.
The inner and outer frames adopt high-strength rust-proof galvanized steel perforated mesh, matched with high-temperature-resistant special epoxy resin end cap adhesive. It can operate stably for a long time under normal working conditions of -10℃ to +100℃ (up to 120℃ instantaneously) and 0.7 – 1.3 MPa.
• Anti-static safety structure.
The built-in flange version is equipped with professional anti-static diversion metal pins (grounding devices) to effectively discharge static electricity generated by high-speed friction of oil and gas, eliminating the risk of static ignition inside the oil-gas barrel.
Catatan Instalasi
Hentikan sistem dan lepaskan tekanan sebelum penghapusan. Konfirmasi arah aliran dan segel permukaan sebelum instalasi.
Penggantian & amp
Ganti sesuai dengan penurunan tekanan atau jadwal pemeliharaan. Inspeksi kebocoran dan kerusakan segel.
Sebelum Ordering
Konfirmasi medium, laju aliran, tekanan, suhu, koneksi dan ruang instalasi yang tersedia.
Opsi Pengiriman
Pengiriman atau layanan pickup. Tim kami mengkonfirmasi pengaturan terbaik berdasarkan tujuan, berat dan memimpin waktu.
Dikonfirmasi sebelum Dispatch
Setelah penyelidikan, kami memverifikasi spesifikasi, harga dan status pasokan sebelum pengiriman.
Dukungan Sedang berlangsung
Untuk spesifikasi, instalasi atau pertanyaan berkualitas, jaga informasi produk dan ketertiban tersedia ketika menghubungi kita.
INQUIRYKirim penyelidikan untuk produk ini
Send your requirements for 1092081300 and our selection team will confirm compatibility, price and lead time.
Sumber Daya Pilihan
Need help confirming 1092081300 or comparing it with another reference? Use these selection resources before ordering.



