
Filtrasi terpercaya dimulai dengan spesifikasi yang diverifikasi.
Pemisah Minyak Udara 6.3760.0
Elemen penggantian Elemen Kompresor Udara
Elemen Filter Kompresor Udara
Part number 6.3760.0 is an air oil separator core for screw air compressors. Its main function is to separate lubricating oil from the discharged compressed air, so as to ensure clean output gas and m
Perintah dikonfirmasi oleh tim kami untuk harga, kompatibilitas dan pengiriman.
Spesifikasi terverifikasi untuk seleksi percaya diri.
Konfirmasikan persyaratan instalasi terhadap peralatan manual atau dokumentasi asli.
| Tinggi | 525 mm |
|---|---|
| Diameter luar | 274 mm |
| Diameter Luar Terbesar | 328 mm |
| Dialog Dalam | 210 mm |
| Berat | 9.42 Kg |
| Presisi filtrasi | 0.3: |
| Segel Material | Dimatikan |
Bagian nomor 6.3760.0 adalah inti pemisah minyak udara untuk kompresor udara sekrup. Fungsi utamanya adalah untuk memisahkan minyak pelumas dari udara terkompresi habis, sehingga untuk memastikan gas keluaran bersih dan mempertahankan sirkulasi efisien minyak pelumas dalam sistem kompresor.
Prinsip Kerja Inti
During the operation of the screw air compressor, lubricating oil is injected into the main unit for cooling and sealing, so the discharged compressed air contains a large amount of oil mist.
1. Primary Separation: After the oil-gas mixture enters the oil-gas tank, mechanical separation is realized through mechanical rotation and collision. Approximately 99% of the liquid oil settles.
2. Fine Separation: The remaining micron-sized oil mist passes through the 6.3760.0 filter element along with the air. Relying on the coalescence, collision and interception effects of high-density glass fibers, the oil mist converges into large oil droplets on the surface of the filter element, flows to the bottom under the action of gravity, and returns to the main unit for recycling through the oil return pipe; clean compressed air is discharged through the inside of the filter element.
Produksi Produk Inti
• Ultra-low oil carryover in exhaust: Adopts imported high-density borosilicate glass fiber composite material. Fine layered filtration strictly controls residual oil content in the final exhaust below 3 PPM (parts per million), preventing oil contamination of downstream precision pneumatic components and production lines.
• Low pressure drop and energy saving: The optimized air flow channel design delivers extremely low initial resistance (pressure drop). This allows the air compressor to operate without overcoming excessive resistance, substantially cutting the operating energy consumption and electricity costs of the equipment.
• Robust high-pressure explosion-proof frame: The inner and outer support screens are made of thickened high-strength stainless steel or electroplated anti-corrosion steel plates with high-temperature-resistant spiral lock-seam technology. It can withstand an instantaneous high pressure differential of up to 5 bar (approximately 0.5 MPa), avoiding oil blow-by accidents caused by filter element collapse or puncture under sudden heavy loads or clogging conditions.
• Excellent static dissipation design: Static conduction devices are integrated inside the filter element and at the flange. In dry environments where static electricity is readily generated by high-speed air friction, accumulated static charges can be safely diverted to the system ground wire to prevent static sparks and eliminate explosion and combustion risks inside the oil-gas tank.
• High-standard sealing protection: Equipped with supporting high-temperature and corrosion-resistant special Viton or nitrile rubber gaskets, ensuring a tight, leak-free seal even after long-term immersion in lubricating oil under high pressure and high temperature (up to 120°C).
Catatan Instalasi
1.It is strictly forbidden to remove the "metal static pin" on the flange gasket 2.Thoroughly clean the flange sealing interface 3.Precisely align and check the length of the "return oil pipe" 4.Inspect and clean the "oil return check valve" 5.Flange bolts must be tightened diagonally and evenly. 6.Maintain absolute cleanliness of operations and conduct inspections
Penggantian & amp
Replacement Cycle: The designed service life is 3,500 to 6,000 operating hours under standard working conditions. • Early replacement alert: Replace the entire set immediately when the air compressor control panel triggers an oil separation pressure drop alarm (typically when the pressure drop reaches 0.8–1.2 bar), or when obvious oil carryover or excessive oil content is detected in the downstream air supply pipeline.
Sebelum Ordering
Konfirmasi medium, laju aliran, tekanan, suhu, koneksi dan ruang instalasi yang tersedia.
Opsi Pengiriman
Pengiriman atau layanan pickup. Tim kami mengkonfirmasi pengaturan terbaik berdasarkan tujuan, berat dan memimpin waktu.
Dikonfirmasi sebelum Dispatch
Setelah penyelidikan, kami memverifikasi spesifikasi, harga dan status pasokan sebelum pengiriman.
Dukungan Sedang berlangsung
Untuk spesifikasi, instalasi atau pertanyaan berkualitas, jaga informasi produk dan ketertiban tersedia ketika menghubungi kita.
INQUIRYKirim penyelidikan untuk produk ini
Send your requirements for 6.3760.0 and our selection team will confirm compatibility, price and lead time.
Sumber Daya Pilihan
Need help confirming 6.3760.0 or comparing it with another reference? Use these selection resources before ordering.



