
Filtrasi terpercaya dimulai dengan spesifikasi yang diverifikasi.
Pemisahan Minyak Udara B010454350
Elemen penggantian Elemen Kompresor Udara
Elemen Filter Kompresor Udara
Part number B010454350 (also commonly written as 010454350 or 10454350) is the oil-gas separator core for screw air compressor. Enquire about relevant information.Core Functions and Working Principle
Perintah dikonfirmasi oleh tim kami untuk harga, kompatibilitas dan pengiriman.
Spesifikasi terverifikasi untuk seleksi percaya diri.
Konfirmasikan persyaratan instalasi terhadap peralatan manual atau dokumentasi asli.
| Presisi filtrasi | 0.3: |
|---|---|
| Diameter luar | 300 mm |
| Dialog Dalam | 220 mm |
| Diameter Luar Flang | 355 mm |
| Tinggi | 600 mm |
| Penurunan Tekanan Awal | 0.02 MP |
Bagian nomor B010454350 (juga umumnya ditulis sebagai 010454350 atau 10454350) adalah tambang-gas inti pemisah untuk sekrup kompresor udara. Tanyakan tentang informasi yang relevan.
Fungsi Inti dan Prinsip Kerja
Elemen pemisah ini mengadopsi interception & quot; koalescence & quot; prinsip:
Pemisahan kasar: lebih dari 90% tetesan minyak besar menetap ke dasar dari tong minyak-gas melalui tabrakan mekanis dan gravitasi ketika memasuki laras.
2. Fine separation (function of this product): Air containing micron-sized oil mist passes through the special multi-layer composite glass fiber layer of the filter element.
3. Coalescence and recovery: Extremely tiny oil droplets are trapped and merge with each other when passing through the filter screen to form larger oil droplets. These droplets flow to the bottom of the filter element under gravity, are sucked back into the airend for recycling via the oil return pipe of the air compressor, and finally clean high-pressure air with almost no oil content is discharged.
Product Structure and Design Features
Multi- layer langkah penyaringan: Media filter internal umumnya terdiri dari lapisan pre-filter, lapisan serat koalecing ultra- halus, lapisan dukungan dan lapisan pemisahan. Ini multi- layer desain tidak hanya meningkatkan efisiensi filtrasi, tetapi juga memberikan elemen filter yang sangat tinggi dirt- memegang kapasitas.
Heavy- tugas diperkuat kerangka logam: tertinggi-kekuatan, korosi-resistensi perforated mesh atau spiral kunci-jahitan diadopsi, menampilkan sangat tekanan resistensi dan hambatan dampak. Bisa menahan perbedaan tekanan tinggi tanpa perubahan atau pemecahan.
• High-temperature resistant special adhesive: Modified polyurethane or epoxy resin adhesive is used for high-strength bonding and curing between the end caps at both ends of the filter element and the central frame, ensuring no debonding or air leakage for long-term service under high-temperature (up to 120°C) and high-pressure conditions.
• Graphite anti-static gasket: Metal conductive pins (or conductive strips) are embedded in the attached sealing gasket. Static electricity is easily generated by the high-speed friction of oil and gas. This design conducts static electricity to the equipment for discharge, effectively preventing internal explosion and combustion inside the oil drum caused by static sparks.
Catatan Instalasi
Earthing Safety: The metal shell of the barrel is equipped with an anti-static earthing conductive gasket (a metal conductive pin is usually fitted at the flange graphite gasket). Do not remove the conductive pin during installation; otherwise, electrostatic sparks may easily cause ignition inside the oil-gas barrel. 2. Seal Assembly: When replacing this model, be sure to replace its matching high-temperature and oil-resistant flange graphite gasket at the same time to prevent high-pressure air leakage or oil-gas side leakage.
Penggantian & amp
Replacement signal: When the separator differential pressure (ΔP) displayed on the air compressor panel exceeds 0.08 - 0.1 MPa (0.8 - 1.0 bar), or obvious oil carry-over (abnormally increased oil consumption) occurs in the rear pipeline, replacement must be carried out immediately. An expired filter element will not only cause a substantial rise in energy consumption (for every 0.1 bar increase in differential pressure, the motor energy consumption increases by approximately 1%), but also bring risks such as the filter element collapsing or rupturing under pressure.
Sebelum Ordering
Konfirmasi medium, laju aliran, tekanan, suhu, koneksi dan ruang instalasi yang tersedia.
Opsi Pengiriman
Pengiriman atau layanan pickup. Tim kami mengkonfirmasi pengaturan terbaik berdasarkan tujuan, berat dan memimpin waktu.
Dikonfirmasi sebelum Dispatch
Setelah penyelidikan, kami memverifikasi spesifikasi, harga dan status pasokan sebelum pengiriman.
Dukungan Sedang berlangsung
Untuk spesifikasi, instalasi atau pertanyaan berkualitas, jaga informasi produk dan ketertiban tersedia ketika menghubungi kita.
INQUIRYKirim penyelidikan untuk produk ini
Send your requirements for B010454350 and our selection team will confirm compatibility, price and lead time.
Sumber Daya Pilihan
Need help confirming B010454350 or comparing it with another reference? Use these selection resources before ordering.



