
Filtrasi terpercaya dimulai dengan spesifikasi yang diverifikasi.
Air/Oil Separator KV360-003
Elemen penggantian Elemen Kompresor Udara
Elemen Filter Kompresor Udara
KV360-003 is Built-in flange type air/oil separator element. This product is specially designed for oil-injected screw air compressors. As an OEM equivalent replacement element of the same quality as
Perintah dikonfirmasi oleh tim kami untuk harga, kompatibilitas dan pengiriman.
Spesifikasi terverifikasi untuk seleksi percaya diri.
Konfirmasikan persyaratan instalasi terhadap peralatan manual atau dokumentasi asli.
| OEM / Cross Referensi | 6.1965.0, 6.2013.0, 6.4024.0,49 000 50 321, 49 000 51 321, 49 004 52 101, 49 004 52 102, 49 004 53 102,P52-5203, P53-0757P52-5203 , P53-0757 |
|---|---|
| Tinggi | 450 mm |
| Diameter luar | 275 mm |
| Dialog Dalam | 219 mm |
| Berat | 8,3 kg |
| Diameter Luar Flang | 328 mm |
| Peringkat filtrasi | 0.1mm |
KV360-003 is Built-in flange type air/oil separator element. This product is specially designed for oil-injected screw air compressors. As an OEM equivalent replacement element of the same quality as original filters of many mainstream brands, it is used to efficiently separate lubricating oil mist from compressed air, ensure the clean operation of the pneumatic system and reduce oil consumption.
Structural and Material Features
• High-quality filter media.
The interior is wound with multiple layers of uniformly graded borosilicate glass microfiber. It features high dust holding capacity and low initial pressure drop (approximately 0.14–0.20 bar), which helps reduce the energy consumption of the air compressor.
• High-strength support structure.
Equipped with high-strength, rust-proof perforated inner and outer metal support screens and galvanized end caps. It can withstand pressure differential shocks up to 5 bar (70 psi) without collapse or deformation.
• Non-porous flange sealing design.
The top flange adopts a non-porous flat flange structure (outer diameter approx. 324–328 mm, total height approx. 450 mm), which is sealed by direct compression against the top cover of the oil-gas separation tank. Two oil-resistant sealing gaskets with conductive metal pins are usually supplied with the unit. They can naturally dissipate static electricity generated during filter operation after installation to ensure equipment safety.
Catatan Instalasi
Hentikan sistem dan lepaskan tekanan sebelum penghapusan. Konfirmasi arah aliran dan segel permukaan sebelum instalasi.
Penggantian & amp
Ganti sesuai dengan penurunan tekanan atau jadwal pemeliharaan. Inspeksi kebocoran dan kerusakan segel.
Sebelum Ordering
Konfirmasi medium, laju aliran, tekanan, suhu, koneksi dan ruang instalasi yang tersedia.
Referensi silang
Referensi informasi terkait dengan produk ini. Hubungi kami jika butuh bantuan mengkonfirmasi nomor referensi silang.
Opsi Pengiriman
Pengiriman atau layanan pickup. Tim kami mengkonfirmasi pengaturan terbaik berdasarkan tujuan, berat dan memimpin waktu.
Dikonfirmasi sebelum Dispatch
Setelah penyelidikan, kami memverifikasi spesifikasi, harga dan status pasokan sebelum pengiriman.
Dukungan Sedang berlangsung
Untuk spesifikasi, instalasi atau pertanyaan berkualitas, jaga informasi produk dan ketertiban tersedia ketika menghubungi kita.
INQUIRYKirim penyelidikan untuk produk ini
Send your requirements for KV360-003 and our selection team will confirm compatibility, price and lead time.
Sumber Daya Pilihan
Need help confirming KV360-003 or comparing it with another reference? Use these selection resources before ordering.



