
Filtrasi terpercaya dimulai dengan spesifikasi yang diverifikasi.
Penyaring pemisah udara / minyak DB2022
Elemen penggantian Elemen Kompresor Udara
Elemen Filter Kompresor Udara
DB2022 adalah elemen filter pemisah gas terintegrasi yang dirancang khusus untuk kompresor udara ukuran sedang dan besar sekrup. Hal ini terutama digunakan untuk efisien memisahkan gas dan cairan dari th
Perintah dikonfirmasi oleh tim kami untuk harga, kompatibilitas dan pengiriman.
Spesifikasi terverifikasi untuk seleksi percaya diri.
Konfirmasikan persyaratan instalasi terhadap peralatan manual atau dokumentasi asli.
| Tinggi | 318 mm |
|---|---|
| Diameter luar | 272,5 mm |
| Dialog Dalam | 219 mm |
| Diameter Luar Flang | 327 mm |
| Berat | 6.71 kg |
| Peringkat filtrasi | 0.1mm |
| OEM / Cross Referensi | AS2419, LE27007x, OS5101,04804000.157.070.S, 4021,51.2.4086111.49000101.4990001032 |
DB2022 adalah elemen filter pemisah gas terintegrasi yang dirancang khusus untuk kompresor udara ukuran sedang dan besar sekrup. Hal ini terutama digunakan untuk efisien terpisah gas dan cairan dari tinggi suhu minyak - campuran gas habis oleh unit utama, memastikan kebersihan udara dikompresi, dan memulihkan minyak pelumas untuk daur ulang.
Kinerja Inti dan Fitur Teknis
• High-efficiency coalescing separation.
Adopting multi-layer gradient superfine glass fiber composite filter media, it achieves an oil-gas separation efficiency of over 99.99% via direct interception, inertial impaction and Brownian diffusion mechanisms, with a nominal filtration accuracy of 0.1 μm.
• High-flow and low-resistance design.
The rated air handling capacity reaches up to 924 m³/h (approximately 15.4 m³/min), compatible with screw air compressors in the 90kW–110kW power range. The initial pressure drop does not exceed 0.02 MPa (0.2 bar), which effectively reduces the loading energy consumption of the air compressor.
High- kekuatan struktur resistensi.
The interior is supported by a high-strength anti-corrosion carbon steel perforated mesh frame. The end caps are sealed by precision stamping and high-temperature-resistant structural adhesive, capable of withstanding a continuous operating temperature of up to 120°C and transient pressure differential shocks from the system.
• Safe anti-static design.
The flange is equipped with an oil-resistant sealing gasket and built-in conductive pins/static dissipation structure, ensuring static electricity generated by friction under high-speed airflow inside the filter element can be safely conducted to the grounded oil-gas barrel shell to eliminate risks of oil and gas combustion and explosion.
• Long service life.
Under standard air intake and regular lubricating oil maintenance conditions, the normal service life can reach 4,000 to 8,000 hours.
Key Factors Affecting Actual Filtration Precision
During operation, whether the DB2022 can stably achieve a 0.1 μm-level separation effect is directly affected by the following operating conditions:
• Operating pressure differential.
The initial pressure drop shall be ≤ 0.02 MPa (0.2 bar). When the service life expires or the filter medium is clogged and the pressure differential exceeds 0.08–0.10 MPa (0.8–1.0 bar), oil droplets may be forced through the filter medium by high-pressure airflow, resulting in a sharp rise in oil content in exhaust gas.
• System temperature.
The normal exhaust temperature should range from 75°C to 95°C. If it remains above 110°C–120°C for a long time, the lubricating oil will generate substantial oil vapor (gaseous rather than liquid microdroplets), exceeding the physical interception limit of the coalescing filter element.
• Condition of the oil return pipeline.
The secondary oil return tube at the bottom of the filter element (extending from the top M8 connector to the bottom) must remain unobstructed with a 2–3 mm gap from the bottom of the element. Otherwise, the coalesced liquid oil cannot be drained in a timely manner and will be re-carried into the compressed air pipeline network by the airflow.
Catatan Instalasi
Hentikan sistem dan lepaskan tekanan sebelum penghapusan. Konfirmasi arah aliran dan segel permukaan sebelum instalasi.
Penggantian & amp
Ganti sesuai dengan penurunan tekanan atau jadwal pemeliharaan. Inspeksi kebocoran dan kerusakan segel.
Sebelum Ordering
Konfirmasi medium, laju aliran, tekanan, suhu, koneksi dan ruang instalasi yang tersedia.
Referensi silang
Referensi informasi terkait dengan produk ini. Hubungi kami jika butuh bantuan mengkonfirmasi nomor referensi silang.
Opsi Pengiriman
Pengiriman atau layanan pickup. Tim kami mengkonfirmasi pengaturan terbaik berdasarkan tujuan, berat dan memimpin waktu.
Dikonfirmasi sebelum Dispatch
Setelah penyelidikan, kami memverifikasi spesifikasi, harga dan status pasokan sebelum pengiriman.
Dukungan Sedang berlangsung
Untuk spesifikasi, instalasi atau pertanyaan berkualitas, jaga informasi produk dan ketertiban tersedia ketika menghubungi kita.
INQUIRYKirim penyelidikan untuk produk ini
Send your requirements for DB2022 and our selection team will confirm compatibility, price and lead time.
Sumber Daya Pilihan
Need help confirming DB2022 or comparing it with another reference? Use these selection resources before ordering.



