
Filtrasi terpercaya dimulai dengan spesifikasi yang diverifikasi.
Elemen Pemisah Minyak B006700770027
Elemen penggantian Elemen Kompresor Udara
Elemen Filter Kompresor Udara
B006700770027 Oil Separator Filter is built-in oil-gas separation component specially designed for large oil-injected screw air compressors. Installed inside the oil-gas separation tank of the air com
Perintah dikonfirmasi oleh tim kami untuk harga, kompatibilitas dan pengiriman.
Spesifikasi terverifikasi untuk seleksi percaya diri.
Konfirmasikan persyaratan instalasi terhadap peralatan manual atau dokumentasi asli.
| Tinggi | 304.8 mm |
|---|---|
| Diameter luar | 274.6 mm |
| Dialog Dalam | 200.2 |
| Peringkat filtrasi | 0.01 ~ 0.03 μm |
| Berat | 7.72 kg |
| Diameter Luar Flang | 355,6 mm |
B006700770027 Oil Separator Filter is built-in oil-gas separation component specially designed for large oil-injected screw air compressors. Installed inside the oil-gas separation tank of the air compressor, it is responsible for deeply intercepting and separating the lubricating oil mist carried in the airflow before the compressed air enters the aftercooler and the gas consumption end, ensuring the cleanliness of downstream compressed air and realizing the recycling of lubricating oil.
Fitur Produk Inti
• High-precision deep filtration.
Adopting multi-layer superfine fiberglass composite filter media, it can effectively capture oil-aerosol particles at the level of 0.01 ~ 0.03 μm. The filtration efficiency reaches over 99%, ensuring the oil content in exhaust gas is controlled at ≤ 3 ppm.
• Low pressure differential energy-saving design.
The optimized pleated filter layer structure and high-permeability support net greatly reduce air flow resistance, with an initial pressure differential of only ≤ 0.02 MPa (approx. 0.2 bar), helping cut energy consumption loss during the loaded operation of air compressors.
• High-strength explosion-proof and pressure-resistant structure.
The inner and outer protective screens are made of high-strength galvanized carbon steel perforated plates. Combined with oil-resistant high-temperature end caps and special adhesives, it can withstand a maximum working pressure of 10 bar and scouring by high-temperature oil and gas, preventing the filter element from deforming or collapsing under high pressure differential.
• Static dissipation safety protection.
The flange plate is equipped with conductive gaskets or anti-static pins, which can promptly conduct static charges generated by high-speed friction of oil mist to the oil-gas tank shell, eliminating the risk of static sparks in the oil-gas mixed environment.
Catatan Instalasi
Hentikan sistem dan lepaskan tekanan sebelum penghapusan. Konfirmasi arah aliran dan segel permukaan sebelum instalasi.
Penggantian & amp
Ganti sesuai dengan penurunan tekanan atau jadwal pemeliharaan. Inspeksi kebocoran dan kerusakan segel.
Sebelum Ordering
Konfirmasi medium, laju aliran, tekanan, suhu, koneksi dan ruang instalasi yang tersedia.
Opsi Pengiriman
Pengiriman atau layanan pickup. Tim kami mengkonfirmasi pengaturan terbaik berdasarkan tujuan, berat dan memimpin waktu.
Dikonfirmasi sebelum Dispatch
Setelah penyelidikan, kami memverifikasi spesifikasi, harga dan status pasokan sebelum pengiriman.
Dukungan Sedang berlangsung
Untuk spesifikasi, instalasi atau pertanyaan berkualitas, jaga informasi produk dan ketertiban tersedia ketika menghubungi kita.
INQUIRYKirim penyelidikan untuk produk ini
Send your requirements for B006700770027 and our selection team will confirm compatibility, price and lead time.
Sumber Daya Pilihan
Need help confirming B006700770027 or comparing it with another reference? Use these selection resources before ordering.



