
Filtrasi terpercaya dimulai dengan spesifikasi yang diverifikasi.
Pemisahan Udara / Minyak OT 4373
Elemen penggantian Elemen Kompresor Udara
Elemen Filter Kompresor Udara
OT4373 is an external flange-type oil-gas separator filter element specially designed for screw air compressors. It is mainly used to accurately intercept and recover lubricating oil mist in compresse
Perintah dikonfirmasi oleh tim kami untuk harga, kompatibilitas dan pengiriman.
Spesifikasi terverifikasi untuk seleksi percaya diri.
Konfirmasikan persyaratan instalasi terhadap peralatan manual atau dokumentasi asli.
| Tinggi | 256 mm |
|---|---|
| Diameter luar | 212.8 mm |
| Dialog Dalam | 149.4 mm |
| Berat | 3.59 kg |
| Diameter Luar Flang | 300 mm |
| Peringkat filtrasi | 0,1 μm |
| OEM / Cross Referensi | 1614.4373.00,1614437300,2911.0015.00,4900252131,P525530,DC 3015 |
OT4373 is an external flange-type oil-gas separator filter element specially designed for screw air compressors. It is mainly used to accurately intercept and recover lubricating oil mist in compressed air, ensuring efficient equipment operation and clean air supply.
Fungsi Inti dan Prinsip Kerja
• Efficient oil-gas separation.
It adopts an Out-In filtration flow direction. When compressed air carrying high-temperature and high-pressure oil mist passes through the filter element, the multi-layer ultra-fine glass fiber coalescing media can capture submicron oil droplets smaller than 0.1 micron.
• Oil coalescence and return.
The intercepted tiny oil droplets gradually coalesce into large oil beads inside the filter media, gather in the groove at the bottom of the filter element under gravity, and are then guided back to the lubrication system of the air compressor through the oil return pipe for recycling, greatly reducing oil consumption.
Structural Design and Quality Characteristics
• High-strength collapse-resistant frame.
Both the inner and outer layers are equipped with high-strength galvanized perforated steel support screens, which can withstand the instantaneous high pressure difference during air compressor startup and high-load operating conditions and prevent deformation or damage of the filter element.
• Safe static-conductive design.
The top flange is standardly fitted with an oil-resistant composite sealing gasket, and built-in metal static-conductive rivets and M8 grounding studs, which can safely conduct away static electricity generated by friction of high-speed airflow and eliminate the risk of static ignition inside the oil-gas tank.
• Low resistance and long service life. The initial operating pressure difference is usually lower than 0.2 bar. While maintaining low energy consumption, the residual oil content in exhaust gas is stably controlled within 1 – 3 ppm.
Catatan Instalasi
Hentikan sistem dan lepaskan tekanan sebelum penghapusan. Konfirmasi arah aliran dan segel permukaan sebelum instalasi.
Penggantian & amp
Ganti sesuai dengan penurunan tekanan atau jadwal pemeliharaan. Inspeksi kebocoran dan kerusakan segel.
Sebelum Ordering
Konfirmasi medium, laju aliran, tekanan, suhu, koneksi dan ruang instalasi yang tersedia.
Referensi silang
Referensi informasi terkait dengan produk ini. Hubungi kami jika butuh bantuan mengkonfirmasi nomor referensi silang.
Opsi Pengiriman
Pengiriman atau layanan pickup. Tim kami mengkonfirmasi pengaturan terbaik berdasarkan tujuan, berat dan memimpin waktu.
Dikonfirmasi sebelum Dispatch
Setelah penyelidikan, kami memverifikasi spesifikasi, harga dan status pasokan sebelum pengiriman.
Dukungan Sedang berlangsung
Untuk spesifikasi, instalasi atau pertanyaan berkualitas, jaga informasi produk dan ketertiban tersedia ketika menghubungi kita.
INQUIRYKirim penyelidikan untuk produk ini
Send your requirements for OT 4373 and our selection team will confirm compatibility, price and lead time.
Sumber Daya Pilihan
Need help confirming OT 4373 or comparing it with another reference? Use these selection resources before ordering.



