
Filtrasi terpercaya dimulai dengan spesifikasi yang diverifikasi.
Air/Oil Separator Element 442786
Elemen penggantian Elemen Kompresor Udara
Elemen Filter Kompresor Udara
The 442786 oil-gas separator filter element is an efficient built-in core oil-gas separation consumable developed for screw air compressors (mainly compatible with the 75HP ~ 100HP series, such as GRH
Perintah dikonfirmasi oleh tim kami untuk harga, kompatibilitas dan pengiriman.
Spesifikasi terverifikasi untuk seleksi percaya diri.
Konfirmasikan persyaratan instalasi terhadap peralatan manual atau dokumentasi asli.
| Tinggi | 497 mm |
|---|---|
| Diameter luar | 170 mm |
| Dialog Dalam | 122 mm |
| Berat | 3.61 kg |
| Diameter Luar Flang | 300 mm |
| Peringkat filtrasi | 0.1: |
| OEM / Cross Referensi | FLR-9950,KS-P-2736 |
The 442786 oil-gas separator filter element is an efficient built-in core oil-gas separation consumable developed for screw air compressors (mainly compatible with the 75HP ~ 100HP series, such as GRH2-75, GRH2-100A, GRH3-75/100A and other models).
Kemajuan Inti dan Fitur
• High-precision depth filtration:
Adopts imported superfine glass fiber composite filter media with a multi-layer gradient pore coalescence structure, which can efficiently capture micron-sized oil mist particles. The filtration accuracy reaches ≤ 0.1 μm, and the residual oil content of compressed air is stably controlled within 3 ppm.
• Low pressure drop for higher energy efficiency:
The optimized pleated wave and flow guide structure design delivers an initial pressure drop as low as ≤ 0.02 MPa, effectively reducing the operating power consumption of the air compressor and preventing abnormal exhaust temperature or energy waste caused by excessive pressure difference.
• High-strength pressure-resistant structure:
The inner and outer support frames are made of high-strength perforated galvanized carbon steel (stainless steel is optional). Combined with high-temperature resistant, anti-aging special bonding technology and anti-static flow guide design, it can withstand high temperatures up to 120 ℃ and pressure shocks from frequent start-stop cycles, eliminating the risk of filter element deformation or breakdown.
• Precise fit for original equipment interfaces:
Manufactured strictly using molds made to original specifications (flange outer diameter 300 mm × barrel outer diameter 170 mm × inner diameter 122 mm × total height 497 mm). It perfectly matches the mounting positions of the original oil-gas separator tank and oil return pipe, featuring reliable sealing and easy installation and removal.
Catatan Instalasi
Hentikan sistem dan lepaskan tekanan sebelum penghapusan. Konfirmasi arah aliran dan segel permukaan sebelum instalasi.
Penggantian & amp
Ganti sesuai dengan penurunan tekanan atau jadwal pemeliharaan. Inspeksi kebocoran dan kerusakan segel.
Sebelum Ordering
Konfirmasi medium, laju aliran, tekanan, suhu, koneksi dan ruang instalasi yang tersedia.
Opsi Pengiriman
Pengiriman atau layanan pickup. Tim kami mengkonfirmasi pengaturan terbaik berdasarkan tujuan, berat dan memimpin waktu.
Dikonfirmasi sebelum Dispatch
Setelah penyelidikan, kami memverifikasi spesifikasi, harga dan status pasokan sebelum pengiriman.
Dukungan Sedang berlangsung
Untuk spesifikasi, instalasi atau pertanyaan berkualitas, jaga informasi produk dan ketertiban tersedia ketika menghubungi kita.
INQUIRYKirim penyelidikan untuk produk ini
Send your requirements for 442786 and our selection team will confirm compatibility, price and lead time.
Sumber Daya Pilihan
Need help confirming 442786 or comparing it with another reference? Use these selection resources before ordering.



